SetPreference {Steel CISC 95}

SetPreference

Syntax

SapObject.SapModel.DesignSteel.CISC_95.SetPreference

VB6 Procedure

Function SetPreference(ByVal Item As Long, ByVal Value As Double) As Long

Parameters

Item

This is an integer between 1 and 14, inclusive, indicating the preference item considered.

1 = Framing type

2 = Phi bending

3 = Phi compression

4 = Phi tension

5 = Phi shear

6 = Consider deflection

7 = DL deflection limit, L/Value

8 = SDL + LL deflection limit, L/Value

9 = LL deflection limit, L/Value

10 = Total deflection limit, L/Value

11 = Total camber limit, L/Value

12 = Pattern live load factor

13 = Demand/capacity ratio limit

14 = Multi-response case design

Value

The value of the considered preference item.

1 = Framing type

1 = Moment Frame

2 = Braced Frame

2 = Phi bending

Value > 0

3 = Phi compression

Value > 0

4 = Phi tension

Value > 0

5 = Phi shear

Value > 0

6 = Consider deflection

0 = No

Any other value = Yes

7 = DL deflection limit, L/Value

Value > 0

8 = SDL + LL deflection limit, L/Value

Value > 0

9 = LL deflection limit, L/Value

Value > 0

10 = Total load deflection limit, L/Value

Value > 0

11 = Total camber limit, L/Value

Value > 0

12 = Pattern live load factor

Value >= 0

13 = Demand/capacity ratio limit

Value > 0

14 = Multi-response case design

1 = Envelopes

2 = Step-by-step

3 = Last step

4 = Envelopes -- All

5 = Step-by-step -- All

Remarks

This function sets the value of a steel design preference item.

The function returns zero if the item is successfully set; otherwise it returns a nonzero value.

VBA Example

Sub SetSteelDesignPreferenceItemCISC_95()

'dimension variables

Dim SapObject as cOAPI

Dim SapModel As cSapModel

Dim ret As Long

'create Sap2000 object

Set SapObject = CreateObject("CSI.SAP2000.API.SapObject")

'start Sap2000 application

SapObject.ApplicationStart

'create SapModel object

Set SapModel = SapObject.SapModel

'initialize model

ret = SapModel.InitializeNewModel

'create model from template

ret = SapModel.File.New2DFrame(PortalFrame, 2, 144, 2, 288)

'set steel design code

ret = SapModel.DesignSteel.SetCode("CISC 95")

'set preference item

ret = SapModel.DesignSteel.CISC_95.SetPreference(1, 2)

'close Sap2000

SapObject.ApplicationExit False

Set SapModel = Nothing

Set SapObject = Nothing

End Sub

Release Notes

Initial release in version 11.03.

Changed Time history design item to Multi-response case design and added additional values in version 15.0.1.

See Also

GetPreference